Stain Blocking That Stops the
Toughest Mold and Water Stains
Toughest Mold and Water Stains
IAQ 5000 has been specifically formulated to be exceptionally
effective at blocking stains commonly found in mold remediation situations.
effective at blocking stains commonly found in mold remediation situations.
Product Information |
||
| pds | ||
| msds | ||
| label | ||
| mold brochure | ||
Product Specifications |
||
| Solids by Weight ± 2% | 47.4% |
|
| Solids by Volume ± 2% | 33.8% |
|
| Viscosity at 70° F | 95-100 Kreb Units |
|
| Specular Gloss: | 10-20° @60° |
|
| Flash Point: | Noncombustible |
|
| Shelf Life | 36 Months Min. |
|
(Original Sealed Container) |
||
| Calculated VOC: | 93 Grams/liter |
|
| Coverage: | ||
| Smooth Surfaces: | 400-500 ft2/gal |
|
| Porous Surfaces: | 100-300 ft2/gal |
|
Drying Times (@ 70-77° F, 50% R.H) |
||
| To Touch: | 30 Minute |
|
| To Recoat: | 2 Hours |
|
| Minimum Application Temp: | 50°F (10° C) |
|
| Package Sizes | ||
| 5 Gallon | ||
| Weight Per Gallon± 0.5lbs. | 10.5 lbs/gal |
|
| Part Numbers | ||
| 5 Gallon - White | 8350 |
|
IAQ 5000 is a quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces.
IAQ 5000 provides exceptional adhesion and stain blocking properties and may be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces.
IAQ 5000 also contains an EPA-registered fungicide to prevent mold growth on the surface at the cured film. IAQ 5000 provides maximum breathability, adhesion, and holdout to prolong the life of the finish. Fiberlock IAQ 5000 is recommended for use on wallboard, plaster, sheetrock, masonry, wood, concrete, aluminum, and galvanized metal.
-sm.jpg)
IAQ 5000 complies with the requirements for LEED® EQ Credit 4.2, low-emitting materials: paints and coatings.
Tip: For best results pre-clean and disinfect with a Fiberlock Disinfectant.
Other Suggested Products:
Shockwave Disinfectant & Sanitizer
For projects that involve both porous and non-porous surfaces, try Shockwave disinfectant, sanitizer, fungicide. Shockwave is EPA Registered with over 140 kill claims and is effective in a 98% soil load.
Find out more about Shockwave here.>>
Content for id "base-graybox" Goes Here