IAQ 4000 Rust Inhibiting Direct To Metal Primer
8340-White
Stop Flash Rusting Before it Starts.
IAQ 4000 is ideal for both new and previously coated roof decks, metal paneling, structural steel, corrugated metal siding, and miscellaneous iron and bar joists.
Product Information |
||
| pds | ||
| msds | ||
| label | ||
| mold brochure | ||
Product Specifications |
||
| Solids by Weight ± 2% | 47.3% |
|
| Solids by Volume ± 2% | 33.0% |
|
| viscosity at 70° F | 75-80 Kreb Units |
|
| Specular Gloss: | 30-40° @60° |
|
| Flash Point: | Noncombustible |
|
| Shelf Life | 36 Months Min. |
|
(Original Sealed Container) |
||
| Calculated VOC: | 98 Grams/liter |
|
| Coverage: | ||
| Smooth Surfaces: | 400-450 ft2/gal |
|
| Porous Surfaces: | 250-300 ft2/gal |
|
Drying Times (@ 70-77° F, 50% R.H) |
||
| To Touch: | 1 Hour |
|
| To Recoat: | 1 Hour |
|
| Minimum Application Temp: | 50°F (10° C) |
|
| Package Sizes | ||
| 5 Gallon | ||
| Weight Per Gallon± 0.5lbs. | 10.6lbs/gal |
|
| Part Numbers | ||
| 5 Gallon | 8340 |
|
IAQ 4000 is a rust inhibiting 100% acrylic latex metal coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions.
IAQ 4000 is ideal for both new and previously coated roof decks, metal paneling, structural steel, corrugated metal siding, and miscellaneous iron and bar joists.
IAQ 4000 does not contain flammable solvents found in other rust inhibiting paints, has low odor and fast re-coatability.
-sm.jpg)
IAQ 4000 complies with the requirements for LEED® EQ Credit 4.2, low-emitting materials: paints and coatings.
Tip: For best results pre-clean and disinfect with a Fiberlock Disinfectant.
Other Suggested Products:
Shockwave Disinfectant & Sanitizer
For projects that involve both porous and non-porous surfaces, try Shockwave disinfectant, sanitizer, fungicide. Shockwave is EPA Registered with over 140 kill claims and is effective in a 98% soil load.
Find out more about Shockwave here.>>
Content for id "base-graybox" Goes Here