HVAC Insulation Sealant
Product Information |
|||
| pds | |||
| msds | |||
| label | |||
Product Specifications |
|||
| Solids by Weight ± 2% | 50.0% |
||
| Solids by Volume ± 2% | 39.9% |
||
| viscosity at 70° F | 105-110 Kreb Units |
||
| Specular Gloss: | 74° ± 4 @60° |
||
| Flash Point: | Noncombustible |
||
| Shelf Life | 36 Months Min. |
||
(Original Sealed Container) |
|||
| Calculated VOC: | 89 Grams/liter |
||
| Coverage: | |||
| Smooth Surfaces: | 200-600 ft2/gal |
||
| Porous Surfaces: | 75-175 ft2/gal |
||
Drying Times (@ 70-77° F, 50% R.H) |
|||
| To Touch: | 1-2 hour |
||
| To Recoat: | 4-8 Hours |
||
| Minimum Application Temp: | 50°F (10° C) |
||
| Package Sizes | |||
| 5 Gallon | |||
| Weight Per Gallon | 10 lbs/gal |
||
| Part Numbers | |||
| 5 Gallon | 8385 |
||
IAQ 8500 dries to form a durable, flexible, moisture-resistant protective
coating. Its semi-gloss finish minimizes dirt buildup on the coating surface that provides nutrients that feed mold colonies. IAQ 8000 is high in viscosity to provide maximum bridging ability on insulation materials and to reduce sagging and dripping when applied to the vertical and top surfaces of unlined duct.
IAQ 8500 contains an EPA-registered active ingredient to deter future fungal activity on or in the coating film
Successfully tested to ASTM standard C-411 “Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation”. ASTM E-84 Class “I” fire rating. Meets
requirements of NFPA 90A/90B standard. Additionally, IAQ 8500 was tested in accordance with the procedures outlined in ASTM G 21 and received a No. 0 rating (No fungal growth, 0% growth on the specimens).
Fiberlock IAQ 8500 yields a black finish for a clean white finish try IAQ 8000.
IAQ 8000 complies with the requirements for LEED® EQ Credit 4.2, low-emitting materials: paints and coatings.
